img 06 758 4974
img info@fitzroyopto.co.nz
img 2B Darnell St. Fitzroy Shopping Centre, New Plymouth
Fitting Glasses
Whether it’s the sides, nose bridge or spectacle frames, there are several criteria that are crucial for optimal vision and comfort.

The best tips for relaxed vision and the perfect fit.

The spectacles are pressing against the sides of your head, seeing is strenuous, the nose bridge is annoyingly uncomfortable. What do you do when the spectacles don’t fit properly? What can you watch for when buying spectacles and having them fitted to ensure relaxed and better vision?

Finally! Perfect vision with optimally fitted spectacles and spectacle lenses – but suddenly the sides are pressing against your temples, the nose bridge is getting uncomfortable or the spectacles are constantly slipping down your nose. Continuous relaxed vision does not only depend on having the right spectacle lenses. Everything else regarding them also has to be right for the spectacles to be comfortable all the time and not become irritating for the wearer.

 

There are several ways of achieving greater wearing comfort, usually without spending much time. Come and see us to get the best fitting result.

 

Selecting the right spectacle lenses prescription

In general, thin & light lenses are more comfortable to wear. Plastic spectacle lenses have an advantage, since they can be produced to be up to 50% lighter than mineral lenses (for instance high refractive index lenses made of special plastic from ZEISS ). As a rule, the lighter the spectacles are, the more comfortable they are to wear.

 

No more pinching: the optimal nose bridge for your spectacles

The nose bridge is one of the few points of contact between your face and the spectacles, which makes it even more important to have your spectacles fitted perfectly by your Dispensing Optician. The crucial factor is making sure that the nose pads sit “solidly”, i.e. the pad surface has as much nose contact as possible and the pads are positioned properly all the way round. Otherwise, the spectacles can lose their grip quickly. With plastic spectacle frames in particular, this should be taken into consideration when choosing and fitting the spectacles because the area around the nose on plastic frames is very difficult to alter afterwards. For spectacles with a metal frame, the nose pads come in many different sizes and materials and can be replaced and adjusted easily. Here, again, your Dispensing Optician is aware of all the special aspects for an optimal fit and is happy to give you further detailed advice.

Spectacle sides – properly fitted

The sides of the spectacles should be adjusted to the shape of the head so that no pressure can be felt on the temples. Often, such pressing at the temples is misunderstood to mean that the spectacles are sitting properly. Optimally fitted sides should only cause a slight pressure behind the ear to keep the weight of the spectacles from bearing down on the nose. However, if the spectacles are too tight, the sides “wander” up the sides of the head and the spectacle frames slide down the nose.
By the way, in certain situations the sides of plastic spectacle frames can deform slightly due to changes in temperature caused by the weather. If this causes discomfort, your Dispensing Optician can get the spectacles back to their original shape easily.

Tips for active sports fans: Silicone tips and covers for metal spectacle frames are water-repellent and ensure a tight grip and optimum fit even during heavy sweating.

 

The spectacle frames

Depending on the type of vision aid required, two completely different criteria can apply for the ideal spectacle frame (for instance for progressive lenses). As a rough rule of thumb though, the optimal size of spectacle frames is a combination of two factors: the pupillary distance and the size of the eye sockets. The top of the frame should be below the eyebrows and above the fold of the eye. This offers the best vision as the rim of the frame or the lenses do not get in the way. For a well-proportioned fit, we recommend spectacle frames which are not much wider than the wearer’s face and allow the wearer to look through the middle of the spectacle lenses.

 

Spectacles for children

Comfortable and always firmly in place without slipping: a properly fitted frame is also one of the most important criteria when fitting spectacles for children. Here are some tips for the best spectacle model. A round shape has proven to be a good choice for children’s spectacles since children always like to look over the rim, and so round spectacles ensure a greater area for seeing through. If you choose metal spectacle frames, you also have a so-called “saddle bridge”: two silicone pads joined together that sit on the bridge of the nose providing an extremely comfortable fit.